Boonton 4500B Peak Power Meter Manuel d'utilisateur télécharger pdf (Page 274)

100

101

Boonton 4500B RF Peak Power Analyzer

Remote Operation

5-74

SENSe:PULSe:UNIT

Description: Set or return the units for entering the pulse distal, mesial and proximal levels. If the function is

set to VOLTS, the pulse transition levels will be defined as the specified percentage in voltage. If

set to WATTS, the levels are defined in percent power. Many pulse measurements call for 10% to

90% voltage (which equates to 1% to 81% power) for risetime and falltime measurements, and

measure pulse widths from the half-power (-3dB, 50% power, or 71% voltage) points.

Syntax: SENSe[1|2|6|7]:PULSe:UNIT <asc>

Argument: <asc> = {WATTS, VOLTS} , see Restrictions below.

Valid Modes: Pulse mode only

Restrictions: For MEM1 and MEM2, if the waveform source is TRIG1 or TRIG2, units must be VOLTS.

SENSe:RANGe

Description: Set or return the external trigger input full scale sensitivity in volts.

Syntax: SENSe[3|4]:RANGe <asc>

Argument: <asc> = {5, 50}

5 5 volts max, 1 v/div

50 50 volts max, 10 v/div

Valid Modes: Pulse mode only

1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 371 372

Commentaires sur ces manuels

Pas de commentaire

Boonton 4500B Peak Power Meter Manuel d'utilisateur Page 274

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Boonton 4500B Peak Power Meter