Boonton PIM 31 User Manual Manuel d'utilisateur télécharger pdf (Page 101)

101

The system will boot up automatically and show the user interface in Analyzer

Mode, as shown below:

(2) Before Making Measurements:

Before starting to measure components with the PIM31-F07-UL system, users

are urged to familiarize themselves with the precautions & safety procedures.

Improper operation and handling can cause bodily harm, or damage the

instrument.

• Attach a connector saver to both the RF Port and to the Load (if not

already attached).

Preparations:

• Connect the Low PIM cable to the Test system (Note: always connect the

test cable to the instrument prior to connecting to the DUT).

• Connect the Load to the test system.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 109 110

Pas de commentaire

Boonton PIM 31 User Manual Manuel d'utilisateur Page 101