Boonton PIM 31 User Manual Manuel d'utilisateur télécharger pdf (Page 70)

9.2 Using PIM31 Remote Application:

Before using the remote application the following default settings for both

IP address and port number need to be verified.

9.2.1 Enter IP address and Port

• Open the “PIM31 Remote Control” software from desktop

• Verify that the IP Address is same as PIM31:

Default : 192.168.0.10

• Enter Port 3100

• Press”Connect” button.

The “Equipment Get” buttons is now enabled

• With proper connection PIM31 should now show “Remote Control” on

its screen

• Press “Equipment Get” button.

The model is now shown in the Equipment field and the settings of

equipment are shown as well.

• Change settings by overwriting the relevant fields and push “Set” button.

• Pressing “RF ON” activates the RF and measurements are done

automatically.

• “RSSI” can be pushed while RF is off

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 109 110

Pas de commentaire

Boonton PIM 31 User Manual Manuel d'utilisateur Page 70