Boonton 4540 Peak Power Meter User Manual Manuel d'utilisateur télécharger pdf (Page 177)

Boonton 4540 Series RF Power Meter

Remote Operation

5-43

OUTPut:MIO:STATus:SETTing

Description: Set/return Multi IO status out setting. Below is a description of each argument:

Argument Description

ALMACT: Sets the Multi IO output to +5 VDC when an alarm is currently active.

Multi IO output will be 0 VDC if no alarms are active.

ALMLATCH: Sets the Multi IO output to +5 VDC when an alarm limit has been

exceeded. Multi IO output will be 0 VDC if no alarm limits have been

exceeded.

MEASRDY: Multi IO output is 5 VDC when a measurement is ready to be read.

CAL: Multi IO output is 5 VDC when a calibration is complete.

Syntax: OUTPut:MIO:STATus:SETTing <character data>

Argument: <character data> = { ALMACT, ALMLATCH, MEASRDY, CAL }

Valid Modes: Any

OUTPut:MIO:STATus:SOURce

Description: Set/return Multi IO source for status out (alarm). Single channel units (Model 4541) only accept

―CH1‖.

Syntax: OUTPut:MIO:STATus:SOURce <character data>

Argument: <character data> = { CH1, CH2, BOTH }

Valid Modes: Any

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 269 270

Pas de commentaire

Boonton 4540 Peak Power Meter User Manual Manuel d'utilisateur Page 177