Boonton 4540 Peak Power Meter User Manual Manuel d'utilisateur télécharger pdf (Page 222)

Boonton 4540 Series RF Power Meter

Remote Operation

5-88

Table 5-1. SCPI COMMAND SUMMARY (continued)

READ[1|2]:ARRay:AMEAsure:POWer? Return new Ppeak, Pavgcyc, Pavgpulse, Ptop, Pbot, Overshoot

READ[1|2]:ARRay:AMEAsure:STATistical? Return new Pavg, Ppeak, Pmin, PkToAvgRatio, CursorPwr,

CursorPct, Sample-Count

READ[1|2]:ARRay:AMEAsure:TIMe? Return new Freq, Period, Width, Offtime, Dcyc, Risetime, Falltime

READ[1|2]:ARRay:CW:POWer? Return new Pavg, Pmax, Pmin, Ppulse or Pk/Avg

READ[1|2]:ARRay:MARKer:POWer? Return new Pavg, Pmax, Pmin, P/Avg, Pmrk1, Pmrk2,

Pmrk1/Pmrk2

READ[1|2]:CW:POWer? Return new average reading in power units

READ[1|2]:INTERval:AVERage? Return average power between MK1 and MK2.

READ[1|2]:INTERval:MAXFilt? Return maximum filtered power between MK1 and MK2.

READ[1|2]:INTERval:MINFilt? Return minimum filtered power between MK1 and MK2.

READ[1|2]:INTERval:MAXimum? Return maximum instantaneous power between MK1 and MK2.

READ[1|2]:INTERval:MINimum? Return minimum instantaneous power between MK1 and MK2.

READ[1|2]:INTERval:PKAVG? Return peak to average power between MK1 and MK2.

READ[1|2]:MARKer[1|2]:AVERage? Return new reading at the specified marker.

READ[1|2]:MARKer:DELTa? Return difference between MK2 and MK1.

READ[1|2]:MARKer[1|2]:MAXimum? Return maximum reading at the specified marker

READ[1|2]:MARKer[1|2]:MINimum? Return minimum reading at the specified marker

READ[1|2]:MARKer:CURsor:PERcent? Return percent at cursor.

READ[1|2]:MARKer:CURsor:POWer? Return relative power at cursor.

READ[1|2]:MARKer:RATio? Return ratio between MK2 and MK1 as a percentage.

READ[1|2]:MARKer:RDELTa? Return difference between MK1 and MK2.

READ[1|2]:MARKer:RRATio? Return ratio between MK1 and MK2 as a percentage.

SENSe[1|2]:AVERage Set/return trace averaging count. <numeric_value> = 1 to 16384

SENSe[1|2]:BANDwidth Set/return sensor video bandwidth. <character data> = LOW,

HIGH

SENSe:ARRay:CALTemp? Returns both channels’ sensor calibration temperatures.

SENSe[1|2]:CALTemp? Returns the selected channel’s sensor calibration temperature.

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 269 270

Pas de commentaire

Boonton 4540 Peak Power Meter User Manual Manuel d'utilisateur Page 222